Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw R1250 Gs
Part: Engine oil

To change the engine oil of a BMW R1250 GS, start by placing the motorcycle on a flat surface. Then, lift the motorcycle on the center stand. Remove the oil filler cap to allow the system to vent and facilitate oil drainage. Place a container under the drain plug and unscrew the plug using the appropriate wrench. Once the drain plug is removed, let the used oil drain completely into the container. Then, screw the drain plug back in, fill the engine with new oil, check the level, and start the engine to distribute the oil. Once completed, the oil maintenance of your BMW R1250 GS will be finished.

Posted on 24 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a BMW R1250 GS?
How to Change the Engine Oil on a BMW R1250 GS?
R1250 Gs In this tutorial, you will learn how to change the engine oil on a BMW R1250 GS, a simple and quick operation to be performed every 12 months. First,…
How to replace the engine oil in the BMW R1250 GS?
How to replace the engine oil in the BMW R1250 GS?
R1250 Gs In this tutorial, we can see how to replace the motor oil in the BMW R1250 GS, an extremely simple and quick operation, to be carried out every 12 mo…
How to replace the motor oil in the BMW R1250 GS?
How to replace the motor oil in the BMW R1250 GS?
R1250 Gs In this tutorial we can see how to replace the motor oil in the BMW R1250 GS, an extremely simple and quick operation. First of all, we wait for the …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos