Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to perform the service (oil and oil filter change) on the BMW R1250 GS

Model: Bmw R1250 Gs
Part: Engine oil

Video tutorial

This guide explains how to change the engine oil and oil filter, performing the regular maintenance service on the BMW R1250 GS. First, place the bike on its centre stand and start by unscrewing the drain bolt located under the engine, allowing the old oil to drain into a container for about ten minutes.

Next, unscrew the oil filter cartridge using the appropriate tool, and replace it with a new one; then pour the new oil into the fill hole, filling to the correct level.


Updated on 9 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil of a BMW R1250 GS?
How to Change the Engine Oil of a BMW R1250 GS?
R1250 Gs To change the engine oil of a BMW R1250 GS, start by positioning the bike on a flat surface. Next, lift the bike onto the centre stand. Remove the oi…
How to Change the Engine Oil in a BMW R1250 GS?
How to Change the Engine Oil in a BMW R1250 GS?
R1250 Gs In this tutorial, you will see how to change the engine oil in a BMW R1250 GS, a very simple and quick operation to be performed every 12 months. Fir…
How to Change the Engine Oil on a BMW R1250 GS?
How to Change the Engine Oil on a BMW R1250 GS?
R1250 Gs In this tutorial, you will learn how to change the engine oil on a BMW R1250 GS, a simple and quick operation to be performed every 12 months. First,…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos