Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Throttle Cable on the Royal Enfield Classic 500

Model: Enfield Classic 500
Part: Accelerator

Video tutorial

Today, follow these instructions to remove and replace the throttle cable on your Royal Enfield Classic 500 motorcycle. First, place the bike on the centre stand and begin by unscrewing the throttle cable screw located under the grip; then disconnect the cable, also detaching it from the carburettor as shown in the video.

At this point, remove the cable along with the sheath, replacing it with the new one; secure it properly and adjust the idle if necessary by starting the engine, following the video tutorial until the end!


Updated on 10 October 2026 by ScegliAuto


Related tutorials

How to Remove the Spark Plug from a Royal Enfield Classic 500
How to Remove the Spark Plug from a Royal Enfield Classic 500
Classic 500 Before you begin, position your Royal Enfield Classic 500 vertically. Start by disconnecting the spark plug lead from the spark plug itself. Next, us…
How to Replace the Rear Suspension on the Royal Enfield Classic 500
How to Replace the Rear Suspension on the Royal Enfield Classic 500
Classic 500 Below are the instructions that will allow you to remove and replace the rear suspension on the Royal Enfield Classic 500 motorcycle. First, place yo…
Replacing Battery on Royal Enfield 500 Classic
Classic 500 In today's video, follow the instructions to remove and replace the engine battery on a Royal Enfield Classic 500. First, switch off the vehicle and …

How to Polish the Exhaust of Malaguti Xsm 50

In this video, we will briefly go through the main steps to clean and polish the exhaust of the Malaguti Xsm 50 enduro bike. First, remove the silencer and exhaust manifold by unscrewing the fixing screws and nuts; then heat the exhaust to a high temperature to loosen any deposits inside. Next, proceed to polish the exhaust using a light metal brush and suitable products, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos