Replacing Battery on Royal Enfield 500 Classic

Model: Enfield Classic 500
Part: Battery

This video is currently unavailable

In today's video, follow the instructions to remove and replace the engine battery on a Royal Enfield Classic 500. First, switch off the vehicle and open the battery compartment with your key; once the cover is removed, disconnect the terminals, starting with the negative and then the positive (using a cross-head screwdriver or socket wrench).

At this point, remove and replace the battery with a new one of the correct type; then reassemble everything by reversing the procedure!

Updated on 11 April 2026 by ScegliAuto

Related tutorials

How to Remove the Spark Plug from a Royal Enfield Classic 500

Classic 500 Before you begin, position your Royal Enfield Classic 500 vertically. Start by disconnecting the spark plug lead from the spark plug itself. Next, us…

How to Replace the Battery on a Royal Enfield Classic 500

Classic 500 Let’s discover the main steps to remove and replace the battery on the Royal Enfield Classic 500, following the instructions below. First, position t…

Battery Replacement on Royal Enfield Classic 500

Classic 500 To access the battery of this motorcycle, a Royal Enfield Classic 500, simply undo the bolt securing the box on the left side of the bike. Once the b…

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!

by ScegliAuto

Replacing Battery on Royal Enfield 500 Classic

Related tutorials

How to Set the Clock on the Yamaha Xmax 300?

More videos