Do it yourself
Frequently asked questions about cars and motorcycles

Battery Replacement on Royal Enfield Classic 500

Model: Enfield Classic 500
Part: Battery

Video tutorial

To access the battery of this motorcycle, a Royal Enfield Classic 500, simply undo the bolt securing the box on the left side of the bike. Once the box is removed, disconnect the two rubber straps holding the battery in place, as clearly shown in the video.

Now, unscrew and then disconnect the two terminals: remember to always start with the negative terminal before moving on to the positive terminal. Done! Remove the battery from its housing.

Insert the new battery and obviously proceed in reverse for reassembly. Cheers!


Updated on 20 April 2026 by ScegliAuto


Related tutorials

Classic 500 Before you begin, position your Royal Enfield Classic 500 vertically. Start by disconnecting the spark plug lead from the spark plug itself. Next, us…
Classic 500 In today's video, follow the instructions to remove and replace the engine battery on a Royal Enfield Classic 500. First, switch off the vehicle and …
Classic 500 Let’s discover the main steps to remove and replace the battery on the Royal Enfield Classic 500, following the instructions below. First, position t…

How to Set the Clock on the Yamaha Xmax 300?

On the Yamaha Xmax 300, you can adjust the clock by turning on the instrument panel, inserting the key into the ignition switch. Once the panel is powered, press and hold the button located on the right side of the handlebars, just below the red button. You will notice the hours start to flash, and you can change them by repeatedly pressing the same button. After a few seconds, the minutes will also start to flash, which can be adjusted using the same method.

Watch the video!


by ScegliAuto

More videos