Do it yourself
Frequently asked questions about cars and motorcycles
Let’s discover the main steps to remove and replace the battery on the Royal Enfield Classic 500, following the instructions below. First, position the central stand on your bike; then remove the side cover of the battery to gain access. Next, unscrew the nuts of the terminals (positive and negative) to disconnect and remove the battery from its compartment; simply replace it with a new one of the correct type and with the same amperage, following the video to the end!

Updated on 26 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Classic 500 Before you begin, position your Royal Enfield Classic 500 vertically. Start by disconnecting the spark plug lead from the spark plug itself. Next, us…
Classic 500 In today's video, follow the instructions to remove and replace the engine battery on a Royal Enfield Classic 500. First, switch off the vehicle and …
Classic 500 To access the battery of this motorcycle, a Royal Enfield Classic 500, simply undo the bolt securing the box on the left side of the bike. Once the b…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos