Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide provides the main instructions on how to remove and replace the throttle cable on a Keeway Superlight 200 motorcycle. First, place the motorcycle on a stand and begin by disconnecting the throttle cable from the grip by loosening the adjuster. Then, disconnect the cable from the engine along with the sheath, detaching it from the valve as shown in the video. At this point, replace and install the new throttle cable, adjusting it correctly; then check its proper operation and release, following the video tutorial to the end!

Posted on 13 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Keeway Superlight 200?
How do you replace the engine oil of the Keeway Superlight 200?
Superlight 200 To replace the engine oil of the Keeway Superlight 200, you need to loosen the drain plug located in the central lower part of the vehicle: once this…
How to Replace the Throttle Cable on the Keeway Superlight 200
How to Replace the Throttle Cable on the Keeway Superlight 200
Superlight 200 This guide provides instructions for removing and replacing the throttle cable on the Keeway Superlight 200 motorcycle. First, place the motorcycle o…
How to Replace the Clutch of the Keeway Superlight 200?
How to Replace the Clutch of the Keeway Superlight 200?
Superlight 200 To replace the clutch of the Keeway Superlight 200, you need to loosen the screws that secure the cover located on the right side of the bike, at the…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos