Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
If you are not using your T-Max 530 scooter over winter, you want to ensure it is well stored. First, take care of the battery with a battery maintainer: a device that costs only a few dozen pounds (for example, the code B0828L4H1P on Amazon, which costs £41.43, including delivery, and connects easily to the battery, located under the rider's seat, as shown by our friendly YouTuber). Place the bike on a trolley, which will be very useful if you need to move it; it is code B07L17CMS4 on Amazon, costing £52.99. To avoid scratching the fairings (and the garage wall), you can get small sheets of polystyrene or packaging foam to protect both surfaces. Cover it with a nice cover, and it is ready to face winter.

Updated on 11 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Battery on Yamaha T-Max 530
Replacing Battery on Yamaha T-Max 530
T Max 530 In this video, let's see how to remove and replace the battery on a Yamaha T-Max 530, following these simple steps. First, lift the seat and unscrew …
How to Reset the Oil Service on the Yamaha T-MAX 530 Scooter?
How to Reset the Oil Service on the Yamaha T-MAX 530 Scooter?
T Max 530 In this tutorial, see how to reset the service on the Yamaha T-MAX 530 scooter, a very simple and quick operation to perform only after completing th…
How to Change the Remote Battery on a Yamaha T-Max 530
How to Change the Remote Battery on a Yamaha T-Max 530
T Max 530 In this video, you will learn how to change the battery in the remote of a Yamaha T-Max 530: you will need a small, thin flathead screwdriver and a n…

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos