Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Yamaha
    3. :
  3. T Max 530
    4. : Battery replacement on Yamaha T-max 530

Model: Yamaha T Max 530
Part: Battery
Battery replacement on Yamaha T-max 530

Let's see in this video how to remove and replace the battery on a Yamaha T-max 530, following these simple steps. First of all we lift our seat and we go to unscrew the screws that we find laterally on the handlebar; then remove the plastic covers and unscrew the fixing screws of the battery cover, in order to remove it. At this point we are going to disconnect the battery terminals (positive and negative pole); then we unfasten the strap and remove the battery and replace it with the new one, of the right type. Once the battery is inserted, let's go and reassemble everything!


Posted on 19 January 2024 by ScegliAuto



How to change the battery of a Yamaha T-Max 530 remote control.
T Max 530 .. the battery in the remote control of a Yamaha T-Max 530: we will need a small and thin flat-head screwdriver and a new button battery model CR2025, which..
How to reset the oil service on the Yamaha T-MAX 530 scooter?
T Max 530 .. can see how to reset the service on the Yamaha T-MAX 530 scooter, an extremely simple and fast operation, to be carried out only after completing the..
How to disassemble the fairings on the Yamaha T-MAX 530 scooter?
T Max 530 .. how to disassemble the fairings on the Yamaha T-MAX 530 scooter, a simple but rather lengthy operation. First of all, make sure the key is not inserted,..

How to change the engine oil of a Ducati Panigale V4?

To change the motor oil of a Ducati Panigale V4, start by placing the motorcycle on a central or side stand to ensure stability. Start the engine and let it run for a few minutes to heat up the oil and make it more fluid. Turn off the engine and locate the oil drain plug, usually located on the bottom side of the engine. Use an appropriate wrench to unscrew the drain plug and let the used oil drain completely into a collection pan. Once the oil is completely drained, securely tighten the drain plug. Next, locate the oil fill plug on the top side of the engine. Remove the plug and use a funnel to slowly pour the recommended amount of new oil for your motorcycle model. Make sure not to exceed the maximum level indicated on the oil dipstick. Finally, replace the fill plug and ensure it is tightly secured. Check for any oil leaks and start the engine for a few minutes to evenly distribute the new oil in the engine. Once completed, turn off the engine and check the oil level again to ensure it is correct.

Watch the video!


by ScegliAuto

More videos