Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the front turn signal bulb of the Aprilia Dorsoduro 900, you need to loosen the screws that secure the front fender of the motorcycle, so that it can be completely removed from its housing. You can then proceed by unscrewing those that secure the front fairing of the motorcycle and remove it completely: this way you can disconnect the bulb connector and remove it from the inside of the corresponding headlight. The new one can now be inserted and connected to the connector, then everything can be secured to its housing and the panels can be installed.

Posted on 16 January 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace Engine Oil and Oil Filter on Aprilia Dorsoduro 900
Replace Engine Oil and Oil Filter on Aprilia Dorsoduro 900
Dorsoduro 900 Follow these instructions to perform the routine maintenance service by replacing the engine oil and oil filter on the Aprilia Dorsoduro 900. First, …
How to Replace the Indicators on the Aprilia Dorsoduro
How to Replace the Indicators on the Aprilia Dorsoduro
Dorsoduro 900 In today's video, we will see how to replace the original indicators on the Aprilia Dorsoduro. Specifically, we will install new LED units. First, we…
How to Reset the Service Light on the Aprilia Dorsoduro
How to Reset the Service Light on the Aprilia Dorsoduro
Dorsoduro 900 Here are the instructions to reset the service light for the regular oil change maintenance on the Aprilia Dorsoduro. First, place your motorcycle on…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos