Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Service Light on the Aprilia Dorsoduro

Model: Aprilia Dorsoduro 900
Part: Service warning light

Video tutorial

Here are the instructions to reset the service light for the regular oil change maintenance on the Aprilia Dorsoduro. First, place your motorcycle on its stand and turn on the ignition; then navigate to the settings menu using the buttons until you reach the diagnostics option, as shown in the video.

At this point, enter the service code found in your vehicle's maintenance manual and confirm the reset of the engine oil change, following the video to the end!


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Replace the Indicators on the Aprilia Dorsoduro
How to Replace the Indicators on the Aprilia Dorsoduro
Dorsoduro 900 In today's video, we will see how to replace the original indicators on the Aprilia Dorsoduro. Specifically, we will install new LED units. First, we…
Replace Engine Oil and Oil Filter on Aprilia Dorsoduro 900
Replace Engine Oil and Oil Filter on Aprilia Dorsoduro 900
Dorsoduro 900 Follow these instructions to perform the routine maintenance service by replacing the engine oil and oil filter on the Aprilia Dorsoduro 900. First, …
How do you replace the front turn signal bulb on the Aprilia Dorsoduro 900?
How do you replace the front turn signal bulb on the Aprilia Dorsoduro 900?
Dorsoduro 900 In order to replace the front turn signal bulb of the Aprilia Dorsoduro 900, you need to loosen the screws that secure the front fender of the motorc…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos