Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Keeway
    3. : Superlight 200

Keeway Superlight 200 - Videoguide

Keeway Superlight 200
Guide to replacing the battery of the Keeway Superlight 200.
Today's guide will show us the main steps to disassemble and replace the battery of the Keeway Superlight 200 motorcycle. First, we put the motorcycle on the …read all…
Posted on 6 November 2023 by ScegliAuto
Keeway Superlight 200
How do I replace the clutch on the Keeway Superlight 200?
In order to replace the clutch of the Keeway Superlight 200 you have to loosen the screws that fix the casing located on the right side of the bike, in the …read all…
Posted on 16 October 2022 by ScegliAuto
Keeway Superlight 200
How do I replace the air filter on the Keeway Superlight 200?
In order to replace the air filter on the Keeway Superlight 200 you need to loosen the bolts that secure the crankcase cover which is located immediately under …read all…
Posted on 16 September 2022 by ScegliAuto
Keeway Superlight 200
Disassembly of the Keeway SuperLight 200cc rpm indicator
Today we will see how to remove the rpm indicator (instrument cluster) of a Keeway Superlight 200cc. First we go to remove the bolts that we find near the …read all…
Posted on 24 December 2023 by ScegliAuto
Keeway Superlight 200
Engine oil change on a Keeway Superlight
Engine oil change on a Keeway Superlight? Let's see in this video guide how to proceed with the replacement. We place the motorcycle on the original stand (if …read all…
Posted on 12 November 2023 by ScegliAuto
Keeway Superlight 200
We change the engine oil on a Keeway Superlight 200 motorcycle
Let's change the engine oil on a Keeway Superlight 200 motorcycle. Let's see how to do maintenance on the bike. We position the motorcycle on the side stand, …read all…
Posted on 10 November 2023 by ScegliAuto
Battery (1) Air filter (1) Clutch (1) Engine oil (2) Instrument cluster (1)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos