Do it yourself
Frequently asked questions about cars and motorcycles
Change the engine oil on a Keeway Superlight 200 motorcycle. Follow these steps for motorcycle maintenance. Position the motorcycle on the side stand, using a suitable spanner, unscrew the bolt from the oil sump (allow the oil to drain into a container); then, bring the motorcycle upright to ensure all oil drains from the sump. Unscrew the oil filter located on the right side of the motorcycle. Top up the engine with new oil and close with the plastic cap (use a funnel). Use the appropriate oil specified in the manual. Test the engine operation.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Superlight 200 In this tutorial, we will see how to change the engine oil in the Keeway Superlight 200, a very simple and quick operation. First, ensure that the en…
Superlight 200 To replace the engine oil of the Keeway Superlight 200, you need to loosen the drain plug located in the central lower part of the vehicle: once this…
Superlight 200 Changing the engine oil on a Keeway Superlight? Follow this guide to proceed with the replacement. Position the motorcycle on its original stand (if …

How to Reset the Engine Oil Light on a Yamaha XMax 250

This short video demonstrates the procedure to reset the engine oil light on a Yamaha XMax 250 scooter. The operation is very simple and quick; first, insert the motorcycle key into the designated slot and turn it to the first position to power on the instrument panel without starting the vehicle. At this point, you will see the light on the display; simply press the "oil change" button located at the centre of the motorcycle's speedometer and hold it until the light stops flashing. The operation will then be complete; to verify success, turn off and then turn on the instrument panel.

Watch the video!


by ScegliAuto

More videos