|
Do it yourself
| |||
| ||||
|
Model: Yamaha Xmax 125
In this tutorial, you will see how to change the transmission oil on a Yamaha XMAX 125 scooter, an extremely simple and quick operation. First, wait until the engine is completely cold, then locate the bolt at the bottom of the transmission casing, just near the brake, position a container underneath it, and unscrew it. Allow all the oil in the system to drain out completely, tighten the bolt using a torque wrench set to 20 Nm, and through the designated upper hole, add the required amount of oil.
Updated on 11 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Xmax 125
In this tutorial, you will learn how to change the engine oil in a Yamaha XMAX 125 scooter, a very simple and quick operation to perform every 12 mon…
Xmax 125
Briefly, we will see the steps that will allow us to replace the engine oil of the Yamaha Xmax 125 scooter. First, we place the scooter on the center…
Xmax 125
In this tutorial, you will see how to change the engine oil in a Yamaha XMAX 125 scooter, a very simple and quick operation to perform every 12 month…
|
How to Replace the Coolant in the Piaggio Medley 125?
To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
