|
Do it yourself
| |||
| ||||
Model: Ktm Duke 790
Follow these simple and quick steps to remove and replace the brake and clutch levers on a KTM Duke 790. First, place your bike on a stand and begin by unscrewing the bolt of the front brake lever pivot; this allows you to remove and replace the lever with the new one, and finally adjust the lever travel as shown in the video. Similarly, replace the clutch lever; lubricate the inside before installing the new lever, following the video tutorial until the end for reassembly!
Updated on 8 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Duke 790
In order to replace the levers of the KTM Duke 790, you need to loosen the screws that fix them to their housing, on the two side parts of the handle…
Duke 790
It will be possible to replace the exhaust that is installed on the KTM Duke 790 by loosening the screws that fix the terminal to its housing, on the…
Duke 790
To replace the exhaust on a KTM Duke 790, you need to loosen the screws that secure it to its housing, located near the side of the rear mudguard: on…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |