Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Coolant on the KTM Duke 790

Model: Ktm Duke 790
Part: Antifreeze coolant

Video tutorial

Today's steps will show you the procedure for replacing the coolant on the KTM Duke 790 motorcycle. First, place the motorcycle on a stand and start unscrewing the coolant drain screw located on the right side of the engine; let it drain into a container for about ten minutes, as shown in the video.

At this point, remove the side plastic chain cover to access the antifreeze reservoir, unscrewing the cap and then topping it up; fill until you reach the maximum level mark on the reservoir!


Updated on 8 September 2026 by ScegliAuto


Related tutorials

Duke 790 The instructions in this guide will show you how to drain and refill the coolant in the KTM Duke 790 engine. First, place the bike on a stand and beg…
Duke 790 It will be possible to replace the exhaust that is installed on the KTM Duke 790 by loosening the screws that fix the terminal to its housing, on the…
Duke 790 To replace the exhaust on a KTM Duke 790, you need to loosen the screws that secure it to its housing, located near the side of the rear mudguard: on…

How to Replace the Drive Belt on a Peugeot Elyseo 50

This guide provides instructions for removing and replacing the drive belt on the Peugeot Elyseo 50 scooter. First, place the scooter on its centre stand and begin by removing the transmission cover by unscrewing the fastening screws located on the sides; then remove the fan and clutch bell by unscrewing the central nuts, as shown in the video. This will allow you to remove the variator and the drive belt, replacing it with a new original one; also replace the rollers if necessary, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos