|
Do it yourself
| |||
| ||||
How to Replace the Coolant in the KTM Duke 790
Model: Ktm Duke 790
Video tutorial
The instructions in this guide will show you how to drain and refill the coolant in the KTM Duke 790 engine. First, place the bike on a stand and begin disconnecting the coolant pipe from the engine, allowing it to drain into a container for about ten minutes. Then, unscrew the radiator cap and refill with new antifreeze, as shown in the video. At this point, fill the reservoir until reaching the maximum level mark, following the video to the end!
Updated on 28 October 2026 by ScegliAuto
Related tutorials
Duke 790
Today's steps will show you the procedure for replacing the coolant on the KTM Duke 790 motorcycle. First, place the motorcycle on a stand and start …
Duke 790
It will be possible to replace the exhaust that is installed on the KTM Duke 790 by loosening the screws that fix the terminal to its housing, on the…
Duke 790
To replace the levers on a KTM Duke 790, loosen the screws that secure them to their respective housing on both sides of the handlebars. Once the lev…
|
How to Adjust the Suspension on a TM Racing 300?
To adjust the suspension on a TM Racing 300, locate the rear shock absorber of the bike: this will be found inside the vehicle, in the area between the rear mudguard and the rear swingarm. Once the shock absorber is located, adjust it by tightening or loosening the bolts found at its lower and upper parts: following the instructions in the manual, you can perform the suspension adjustment and thus adjust the height of the bike according to your riding needs. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |