Do it yourself
Frequently asked questions about cars and motorcycles
It will be possible to replace the exhaust that is installed on the KTM Duke 790 by loosening the screws that fix the terminal to its housing, on the right side of the vehicle near the rear wheel: once the fixing screws have been removed, it will be possible to proceed by widening the connecting clamp positioned between the exhaust and the collector. At this point, it will be possible to insert the new replacement piece so that it is fixed; after installation, it will be necessary to verify that everything works correctly.

Posted on 6 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Duke 790 To replace the exhaust on a KTM Duke 790, you need to loosen the screws that secure it to its housing, located near the side of the rear mudguard: on…
Duke 790 The instructions in this guide will show us how to drain and refill the engine coolant of the KTM Duke 790. First, we put the bike on the stand and s…
Duke 790 Today's steps will show you the procedure for replacing the coolant on the KTM Duke 790 motorcycle. First, place the motorcycle on a stand and start …

How to Change the Engine Oil of the Benelli Leoncino 250?

To change the engine oil of the Benelli Leoncino 250, loosen the drain plug located at the central lower part of the bike: once this plug is removed, allow all the used oil to flow into a suitably positioned container. Next to the drain plug, you will find the oil filter, which must be removed from its housing and replaced with a new one. After the replacement, top up by pouring oil from the upper part of the crankcase on the left side of the bike.

Watch the video!


by ScegliAuto

More videos