Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery in a KTM Duke 790

Model: Ktm Duke 790
Part: Battery

This video is currently unavailable

In this tutorial, you will see how to replace the battery in a KTM Duke 790, a very simple and quick operation. First, ensure that the key is not inserted, then unclip the seat and remove it. Next, remove the battery cover by unscrewing the relevant bolt with a Torx key, remove the mounting bracket, and starting with the negative terminal, disconnect both terminals.

At this point, simply extract the old battery from its housing, position the replacement, and reassemble everything by following the reverse procedure. Remember to reconnect the positive terminal first.


Updated on 4 September 2026 by ScegliAuto


Related tutorials

How do you replace the exhaust pipe of the KTM Duke 790?
How do you replace the exhaust pipe of the KTM Duke 790?
Duke 790 It will be possible to replace the exhaust that is installed on the KTM Duke 790 by loosening the screws that fix the terminal to its housing, on the…
How to Replace the Coolant in the KTM Duke 790
How to Replace the Coolant in the KTM Duke 790
Duke 790 The instructions in this guide will show you how to drain and refill the coolant in the KTM Duke 790 engine. First, place the bike on a stand and beg…
How to replace the engine oil in the KTM Duke 790?
How to replace the engine oil in the KTM Duke 790?
Duke 790 In this tutorial we can see how to replace the engine oil in the KTM Duke 790, an extremely simple and fast operation. First of all, make sure that t…

How to change the engine oil of a Yamaha MT-07?

To change the engine oil of a Yamaha MT-07, follow these steps. Start by placing the bike on a flat surface and ensure the engine is warm but not too hot. Remove the oil cap from the top of the engine and unscrew the oil drain plug on the engine casing, usually located on the underside of the engine. Position a collection container under the drain plug and unscrew the plug to completely drain the used oil. Once drained, refit the drain plug. Remove and replace the oil filter using an oil filter spanner. Apply a little new oil to the seal of the new filter before installation. Fill the engine with new oil through the oil opening until reaching the recommended level. Check the oil level using the dipstick and add oil if necessary. Refit the oil cap and ensure it is securely tightened. Start the engine and let it run for a few minutes to distribute the oil, and you will have completed the procedure.

Watch the video!


by ScegliAuto

More videos