Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Throttle Cable on a Piaggio Vespa PX 200

Model: Piaggio Vespa Px 200
Part: Accelerator

Video tutorial

Follow these simple instructions to remove and replace the throttle cable on a Piaggio Vespa PX 200, as well as on the LML Star. First, place the central stand and begin by opening the right side fuel box, then disconnect the throttle cable; next, disconnect the cable from the grip by removing the plastic cover of the instrument panel, as shown in the video.

Now install the new throttle cable, securing it to the carburettor's guillotine, and finally adjust the idle!


Updated on 6 November 2026 by ScegliAuto


Related tutorials

How to replace the speedometer cable on the Piaggio Vespa PX 200
How to replace the speedometer cable on the Piaggio Vespa PX 200
Vespa Px 200 In this guide, you will see the steps to remove and replace the speedometer cable on the Piaggio Vespa PX 200, as well as on the LML Star. First, pla…
How to Replace the Gear Selector on the Piaggio Vespa PX 200
How to Replace the Gear Selector on the Piaggio Vespa PX 200
Vespa Px 200 In this guide, we will discover the main instructions for removing and replacing the gear selector on the Piaggio Vespa PX 200. First, place the cent…
How do you replace the seat of the Piaggio Vespa PX 200?
How do you replace the seat of the Piaggio Vespa PX 200?
Vespa Px 200 In order to replace the seat of the Piaggio Vespa PX 200, you need to open the compartment below so that the old seat can be placed vertically: once …

How to Change the Transmission Oil in the Honda SH 150i Scooter?

Changing the transmission oil in the Honda SH 150i scooter, as shown in this tutorial, is an extremely simple and quick operation. First, wait until the engine is cool enough, then locate the three bolts at the rear of the casing and position a container underneath them. Next, use a 12mm socket to remove the two inner bolts, allowing all the oil in the system to drain out, and then tighten the lower bolt. At this point, simply pour in the new oil through the upper hole, using a syringe and a thin tube if necessary.

Watch the video!


by ScegliAuto

More videos