Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this guide, you will see the steps to remove and replace the speedometer cable on the Piaggio Vespa PX 200, as well as on the LML Star. First, place the central stand and begin removing the plastic cover of the instrument panel by unscrewing the screws underneath; then disconnect the speedometer cable. At this point, unscrew the speedometer cable from the front wheel, pulling out the cable along with its sheath; replace it with the new one and reconnect the cable to the speedometer.

Updated on 30 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the throttle cable of the Piaggio Vespa PX 200
How to replace the throttle cable of the Piaggio Vespa PX 200
Vespa Px 200 Following these simple instructions will show us how to disassemble and replace the throttle cable of the Piaggio Vespa PX 200, as well as the LML St…
How to Replace the Gear Selector on the Piaggio Vespa PX 200
How to Replace the Gear Selector on the Piaggio Vespa PX 200
Vespa Px 200 In this guide, we will discover the main instructions for removing and replacing the gear selector on the Piaggio Vespa PX 200. First, place the cent…
How do you replace the clutch of the Piaggio Vespa PX 200?
How do you replace the clutch of the Piaggio Vespa PX 200?
Vespa Px 200 In order to replace the clutch of the Piaggio Vespa PX 200, you will need to remove the panel covering the rear part of the motorcycle, so that it wi…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos