Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Gear Selector on the Piaggio Vespa PX 200

Model: Piaggio Vespa Px 200

Video tutorial

In this guide, we will discover the main instructions for removing and replacing the gear selector on the Piaggio Vespa PX 200. First, place the central stand and start by removing the two screws from the gear selector cover; then disconnect the gear cable from the selector by unscrewing the screw of the small adjuster, as shown in the video.

At this point, install the new original gear selector, connect the new metal cable, and then adjust the wiring, following the video tutorial to the end!


Updated on 25 July 2026 by ScegliAuto


Related tutorials

How to Replace the Fuel Tank on a Piaggio Vespa PX 200
How to Replace the Fuel Tank on a Piaggio Vespa PX 200
Vespa Px 200 In this guide, see the instructions to remove and replace the fuel tank on a Piaggio Vespa PX 200. First, place the central stand and start by removi…
How to Replace the Throttle Cable on a Piaggio Vespa PX 200
How to Replace the Throttle Cable on a Piaggio Vespa PX 200
Vespa Px 200 Follow these simple instructions to remove and replace the throttle cable on a Piaggio Vespa PX 200, as well as on the LML Star. First, place the cen…
How to replace the speedometer cable on the Piaggio Vespa PX 200
How to replace the speedometer cable on the Piaggio Vespa PX 200
Vespa Px 200 In this guide, you will see the steps to remove and replace the speedometer cable on the Piaggio Vespa PX 200, as well as on the LML Star. First, pla…

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos