Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Px 200
Part:

In this guide, see the instructions to remove and replace the fuel tank on a Piaggio Vespa PX 200. First, place the central stand and start by removing the two side panels; then unscrew the screws securing the tank, disconnecting the fuel line from the carburettor as shown in the video. At this point, remove the fuel tank, repair or replace it; then refit and connect the fuel tank, finally opening the tap and waiting a few seconds for the fuel to flow to the carburettor before starting.

Posted on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the clutch of the Piaggio Vespa PX 200?
How do you replace the clutch of the Piaggio Vespa PX 200?
Vespa Px 200 In order to replace the clutch of the Piaggio Vespa PX 200, you will need to remove the panel covering the rear part of the motorcycle, so that it wi…
How do you replace the seat of the Piaggio Vespa PX 200?
How do you replace the seat of the Piaggio Vespa PX 200?
Vespa Px 200 In order to replace the seat of the Piaggio Vespa PX 200, you need to open the compartment below so that the old seat can be placed vertically: once …
How to replace the throttle cable of the Piaggio Vespa PX 200
How to replace the throttle cable of the Piaggio Vespa PX 200
Vespa Px 200 Following these simple instructions will show us how to disassemble and replace the throttle cable of the Piaggio Vespa PX 200, as well as the LML St…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos