|
Do it yourself
| |||
| ||||
|
Model: Piaggio Vespa Px 200
In order to replace the seat of the Piaggio Vespa PX 200, you need to open the compartment below so that the old seat can be placed vertically: once this is done, you can locate the bolts that secure the seat to its housing. By loosening all these bolts, you can completely remove the old seat so that you can position the new one on the respective supports: after installation, you can properly secure it and lower the seat to ensure that everything works correctly.
Posted on 27 October 2025 by ScegliAuto
Video tutorial
Related tutorials
Vespa Px 200
In order to replace the clutch of the Piaggio Vespa PX 200, you will need to remove the panel covering the rear part of the motorcycle, so that it wi…
Vespa Px 200
In this guide, see the instructions to remove and replace the fuel tank on a Piaggio Vespa PX 200. First, place the central stand and start by removi…
Vespa Px 200
Following these simple instructions will show us how to disassemble and replace the throttle cable of the Piaggio Vespa PX 200, as well as the LML St…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |