Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Watch this brief video tutorial to see the steps necessary to reset the V-Belt on a Yamaha Xmax 250. First, turn on the vehicle's ignition without starting the engine. Next, press the "TRIP" button until the temperature in degrees Celsius appears on the information display of the speedometer. Then, briefly press and hold the "RESET" button on the right side of the speedometer until the kilometre reading starts to flash. Wait a few seconds, then press and hold the reset button again until the operation is complete.

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the V-Belt Light on a Yamaha Xmax 250
How to Reset the V-Belt Light on a Yamaha Xmax 250
Xmax 250 To reset the V-Belt light on the Yamaha Xmax 250, turn on the instrument panel by rotating the key in the ignition switch. Once the panel is on, pull…
How to reset the belt change on the Yamaha Xmax 250
How to reset the belt change on the Yamaha Xmax 250
Xmax 250 In this guide we will see the instructions that will allow us to reset the transmission belt change of the Yamaha Xmax 250 scooter. First of all, we …
Resetting the Transmission Belt Change on Yamaha Xmax 250
Resetting the Transmission Belt Change on Yamaha Xmax 250
Xmax 250 These brief and simple steps will show you how to reset the transmission belt change on the Yamaha Xmax 250 scooter. First, place the scooter on the …

How to change the engine oil on a Sym Elite 50?

To change the engine oil on a Sym Elite 50, start by placing the scooter on a flat surface and ensure the engine is warm, not hot. Locate the oil drain plug on the engine and position a collection container underneath it. Unscrew the drain plug and let the used oil flow into the container. Once the drainage is complete, re-tighten the drain plug. Next, locate the oil filler cap on the engine and remove it. Use a funnel to pour new oil into the tank, being careful not to exceed the recommended level. Once the new oil is added, re-tighten the filler cap. Ensure both caps are securely fastened. Start the scooter for a few minutes to allow the oil to circulate in the engine. Finally, turn off the scooter, and you will have completed the oil change.

Watch the video!


by ScegliAuto

More videos