Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Honda
    3. : Wave 110

How do you replace the rear headlight bulb of the Honda Wave 110?

Model: Honda Wave 110
Part: Tail light bulb

Video tutorial

In order to replace the rear headlight bulb of the Honda Wave 110, you need to loosen the screws that secure the outer cover of the optical group. Once this cover has been removed, you will be able to locate the corresponding bulb that needs to be removed from its socket.

Once this is disconnected from the corresponding connector, you can connect the new one to the respective connector. After connecting, you can cover everything with the optical group panel and secure it with the appropriate screws that were just removed.


Posted on 4 February 2025 by ScegliAuto


Related tutorials

Oil Change on a Honda Wave 110
Oil Change on a Honda Wave 110
Wave 110 For this model, it is recommended to use synthetic oil for 4-stroke engines 20W-40. Start the scooter for several minutes to warm up the engine and t…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos