|
Do it yourself
| |||
| ||||
Model: Honda Wave 110
For this model, it is recommended to use synthetic oil for 4-stroke engines 20W-40. Start the scooter for several minutes to warm up the engine and the oil inside, making it less viscous and allowing it to drain better. Unscrew and remove the upper filler cap first, so that air circulation prevents a vacuum and facilitates the operation. Unscrew the bolt that serves as the drain plug, and collect the used oil in a container (and dispose of it properly). Tighten the lower bolt, then refill with the same quantity of oil that was drained from the upper hole. Good luck!
Updated on 26 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Wave 110
In order to replace the rear headlight bulb of the Honda Wave 110, you need to loosen the screws that secure the outer cover of the optical group. On…
|
How to Service the Piaggio Vespa GTS 300
This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |