Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the motor oil in the Piaggio Vespa GTS 125 scooter, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then place a container under the scooter, locate the drain hole bolt and unscrew it using a 24mm socket wrench. Let all the oil in the system drain out, remove the secondary filter and clean it from any dirt residue. At this point, all that remains is to unscrew the main filter, tighten the replacement, reassemble everything and pour the new oil through the appropriate hole.

Posted on 3 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the engine oil in the Piaggio Vespa GTS 125 scooter?
How to replace the engine oil in the Piaggio Vespa GTS 125 scooter?
Vespa Gts 125 .. In this tutorial we can see how to replace the engine oil in the Piaggio Vespa GTS 125 scooter, an extremely simple and quick operation... …
How to Change the Engine Oil and Oil Filter on the Piaggio Vespa GTS 125
How to Change the Engine Oil and Oil Filter on the Piaggio Vespa GTS 125
Vespa Gts 125 In this brief and simple guide, we will go through the steps to perform routine maintenance by changing the engine oil and oil filter on the Piaggio …
How to adjust the rear shock absorber of the Piaggio Vespa GTS 125
How to adjust the rear shock absorber of the Piaggio Vespa GTS 125
Vespa Gts 125 Below we will see the instructions that will allow us to adjust the stiffness of the rear suspension of the Piaggio Vespa GTS 125 scooter, but also o…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos