Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below we will see the instructions that will allow us to adjust the stiffness of the rear suspension of the Piaggio Vespa GTS 125 scooter, but also of the Vespa GTS 300. First of all, we put the scooter on the center stand and start using the special adjustment key on the lower part of the suspension; we then screw in if we want to make the scooter stiffer during the ride, conversely we will unscrew to make it softer, as shown in the video. At this point, we take a test ride and fine-tune the setting of our suspension if necessary.

Posted on 26 October 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Set the Clock on Piaggio Vespa GTS 125
How to Set the Clock on Piaggio Vespa GTS 125
Vespa Gts 125 In this brief guide, find instructions on how to set the clock on the display of the instrument panel of the Piaggio Vespa GTS 125 and 125 Primavera …
How to adjust the time on the Piaggio Vespa GTS 125 Super Sport scooter?
How to adjust the time on the Piaggio Vespa GTS 125 Super Sport scooter?
Vespa Gts 125 In this tutorial we can see how to adjust the time on the Piaggio Vespa GTS 125 Super Sport scooter, an extremely simple and quick operation, to be c…
How to Replace the Exhaust on a Piaggio Vespa GTS 125?
How to Replace the Exhaust on a Piaggio Vespa GTS 125?
Vespa Gts 125 To replace the exhaust on a Piaggio Vespa GTS 125, loosen the screws that secure it to the corresponding supports at the rear of the scooter: these w…

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos