Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Rear Brake Pads on the KTM Duke 790

Model: Ktm Duke 790
Part: Brake pads

Video tutorial

Replace the rear brake pads on the KTM Duke 790 by loosening the nuts that secure the pin located at the top of the brake caliper, allowing it to be completely removed. After removing the pin, you can slide out the pads inside the brake caliper and replace them with a new spare part.

Once replaced, reinsert the pin into the top of the caliper and secure it with the nuts. After installation, check that the brake functions correctly.


Updated on 3 July 2026 by ScegliAuto


Related tutorials

Duke 790 In this video, we will see how to disassemble and replace the front brake pads on a KTM Duke 790, following the instructions below. First, remove the…
Duke 790 You can replace the front brake pads of the KTM Duke 790 by loosening the screws that secure the brake caliper to its housing at the top of the disc:…
Duke 790 In order to replace the brake pads of the KTM Duke 790, the same operation must be carried out for both the front wheel and the rear wheel: it will b…

How to Reset the Oil Service on the Honda SH Mode 125 Scooter?

In this tutorial, you will see how to reset the oil service on the Honda SH Mode 125 scooter, a very simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by inserting the key but keep it in the initial position, then press and hold the "SET" button located at the bottom right of the dashboard, and simultaneously turn on the instrument panel. At this point, hold the button for about 3 seconds, or for as long as necessary for the service to reset correctly.

Watch the video!


by ScegliAuto

More videos