Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Duke 790
Part: Brake pads

In order to replace the brake pads of the KTM Duke 790, the same operation must be carried out for both the front wheel and the rear wheel: it will be necessary to loosen the screws that fix the brake caliper to the corresponding disc in order to detach it. Once the caliper has been removed, it will be possible to remove the pin that locks the pads inside so that they can be completely extracted: the new pads can now be inserted into the caliper, which will then be positioned on the disc and secured with the screws, ensuring that everything is functioning properly.

Posted on 7 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Front Brake Pads on a KTM Duke 790
Duke 790 In this video, we will see how to disassemble and replace the front brake pads on a KTM Duke 790, following the instructions below. First, remove the…
How to Replace the Front Brake Pads of the KTM Duke 790?
How to Replace the Front Brake Pads of the KTM Duke 790?
Duke 790 You can replace the front brake pads of the KTM Duke 790 by loosening the screws that secure the brake caliper to its housing at the top of the disc:…
How to Replace the Rear Brake Pads on the KTM Duke 790
How to Replace the Rear Brake Pads on the KTM Duke 790
Duke 790 Replace the rear brake pads on the KTM Duke 790 by loosening the nuts that secure the pin located at the top of the brake caliper, allowing it to be …

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos