Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Front Brake Pads on a KTM Duke 790

Model: Ktm Duke 790
Part: Brake pads

This video is currently unavailable

In this video, we will see how to disassemble and replace the front brake pads on a KTM Duke 790, following the instructions below. First, remove the front brake calipers; to do this, unscrew the fixing screws, then disconnect the small cable.

Once the caliper is removed from the disc, unscrew the safety screw of the pads so that you can remove them later; then, simply replace them with new, high-quality ones. Before reassembling the new pads, clean the caliper of any metallic debris!


Updated on 17 April 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads of the KTM Duke 790?
How to Replace the Front Brake Pads of the KTM Duke 790?
Duke 790 You can replace the front brake pads of the KTM Duke 790 by loosening the screws that secure the brake caliper to its housing at the top of the disc:…
How do you replace the brake pads of the KTM Duke 790?
How do you replace the brake pads of the KTM Duke 790?
Duke 790 In order to replace the brake pads of the KTM Duke 790, the same operation must be carried out for both the front wheel and the rear wheel: it will b…
How to Replace the Rear Brake Pads on the KTM Duke 790
How to Replace the Rear Brake Pads on the KTM Duke 790
Duke 790 Replace the rear brake pads on the KTM Duke 790 by loosening the nuts that secure the pin located at the top of the brake caliper, allowing it to be …

How to Replace the Headlight Bulb on the SYM Bonus 110 Scooter?

As shown in this tutorial, replacing the headlight bulb on the SYM Bonus 110 scooter is a very simple and quick task. Before proceeding, ensure the key is not inserted for safety. Start by removing both mirrors, then unscrew all the screws securing the front fairing and separate it from the handlebars. Finally, disconnect the power connector, unscrew the bulb holder screws, and remove the bulb from the headlight. Fit the replacement bulb, avoiding direct contact with the glass using bare hands.

Watch the video!


by ScegliAuto

More videos