|
Do it yourself
| |||
| ||||
|
Model: Keeway Superlight 200
To replace the brake pads on the Keeway Superlight 200, loosen the screws that secure the brake caliper to its housing on the top of the disc. Once the caliper fixing screws are loosened, detach it and remove the pin that secures the pads in their housing. After removing the pin, proceed to remove the old pads and insert the new ones: these can now be secured with the pin, and finally, the caliper can be fixed to the disc with the appropriate screws.
Posted on 27 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Superlight 200
In order to replace the front brake pads of the Keeway Superlight 200, you need to loosen the screws that secure the brake caliper to the correspondi…
Superlight 200
Today's guide will show you the main steps for removing and replacing the battery of the Keeway Superlight 200 motorcycle. First, place the bike on i…
Superlight 200
This guide provides the main instructions on how to remove and replace the throttle cable on a Keeway Superlight 200 motorcycle. First, place the mot…
|
Guide to Replacing the Coolant in the Derbi Senda
Today, we will guide you on how to drain and top up the coolant in the Derbi Senda motorcycle. First, place your bike on a stand and start disconnecting the radiator hose, allowing the fluid to drain into a container for about ten minutes; then unscrew the cap of the radiator and top it up with new antifreeze (suitable for your radiator), as shown in the video. Once the new fluid is poured in, start the engine, topping up if necessary to reach the maximum level! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
