Do it yourself
Frequently asked questions about cars and motorcycles
Changing the engine oil on a Keeway Superlight? Follow this guide to proceed with the replacement. Position the motorcycle on its original stand (if available), and using a socket wrench, unscrew the bolt from the oil sump (drain the fluid into a container). Unscrew the securing screws of the container cap where the oil filter is located and replace it. Remove the plastic cap and top up the new fluid in the engine (use a funnel). Check the oil level with the dipstick located under the cap and close with the plastic cap after topping up.

Updated on 9 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Superlight 200 To replace the engine oil of the Keeway Superlight 200, you need to loosen the drain plug located in the central lower part of the vehicle: once this…
Superlight 200 Change the engine oil on a Keeway Superlight 200 motorcycle. Follow these steps for motorcycle maintenance. Position the motorcycle on the side stand…
Superlight 200 In this tutorial, we will see how to change the engine oil in the Keeway Superlight 200, a very simple and quick operation. First, ensure that the en…

Dismantling and Replacing the Front Cowl of the Kymco Super8 150

Follow these simple steps to dismantle and replace the front cowl of the Kymco Super 8 150 scooter. First, place the scooter on the centre stand and start unscrewing and removing the screws located at the rear of the front cowl; then unscrew the additional screws found underneath, first removing the cover situated above the front headlamp and then the rest of the remaining cowl, as shown in the video. At this point, install the new front cowls, securing all components correctly, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos