Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today, you will learn how to remove the rev counter (instrument cluster) from a Keeway Superlight 200cc. First, remove the bolts located near the handlebars using a socket spanner. Then, remove the plastic cover of the rev counter and take off the rear nut with a spanner. At this point, disconnect all the wiring by pulling out the bulb holders along with the bulbs, disconnecting them from the terminals. Now you can finally remove the rev counter, as illustrated in the video. Apply the reverse procedure for reassembly!

Updated on 29 March 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Throttle Cable on the Keeway Superlight 200
How to Replace the Throttle Cable on the Keeway Superlight 200
Superlight 200 This guide provides instructions for removing and replacing the throttle cable on the Keeway Superlight 200 motorcycle. First, place the motorcycle o…
Guide to Replacing the Battery of the Keeway Superlight 200
Guide to Replacing the Battery of the Keeway Superlight 200
Superlight 200 Today's guide will show you the main steps for removing and replacing the battery of the Keeway Superlight 200 motorcycle. First, place the bike on i…
How to Replace the Air Filter on a Keeway Superlight 200?
How to Replace the Air Filter on a Keeway Superlight 200?
Superlight 200 To replace the air filter on the Keeway Superlight 200, loosen the bolts securing the cover of the casing located just beneath the seat on the right …

How to replace the exhaust on a Derbi Atlantis

Today, we will go through the instructions to remove and replace the exhaust on the Derbi Atlantis scooter in simple and quick steps. First, place the scooter on the centre stand and start unscrewing the screws of the exhaust terminal fixed to the rear frame; use a socket spanner with an extension, as shown in the video. At this point, if necessary, replace the exhaust manifold by removing the original; then install the new compatible and approved exhaust, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos