Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to reset the engine light of the Yamaha Ray RZ, you need to connect a diagnostic tool to the OBD port of the vehicle: the OBD port will be located right above the battery housing, which will be accessible by removing the panel in the central part of the footrest compartment. Once this panel has been removed, you can connect the scanner and select the specific car model and its corresponding version. Once the scanner is connected and you follow the tutorial instructions, you will notice that the light has been reset.

Posted on 6 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the brake light bulb on the Yamaha Ray Rz 125
How to replace the brake light bulb on the Yamaha Ray Rz 125
Ray Zr In the following guide, we will discover together the steps you need to follow in order to correctly replace the brake light bulb of your Yamaha Ray …
How to Change the Engine Oil on a Yamaha Ray ZR
How to Change the Engine Oil on a Yamaha Ray ZR
Ray Zr To change the engine oil on the Yamaha Ray ZR, you need to unscrew the oil drain plug located at the central lower part of the bike, just in front of…
How to set the time on the Yamaha Ray ZR 125 scooter?
How to set the time on the Yamaha Ray ZR 125 scooter?
Ray Zr This tutorial shows how to set the time on the Yamaha Ray ZR 125 scooter, a very simple and quick operation, for example, after disconnecting the bat…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos