Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on the KTM EXC-F 350?

Model: Ktm Exc F 350
Part: Engine oil

Video tutorial

To change the engine oil on the KTM EXC-F 350, loosen the drain plug located at the central lower part of the oil sump: once this plug is removed, all the used oil can flow into a suitably positioned container. When all the oil has drained out, remove the oil filter from its housing and replace it with a new one: this filter is located on the left side of the bike.

On the opposite side, there will be a breather through which to insert the necessary amount of new engine oil.


Updated on 10 November 2026 by ScegliAuto


Related tutorials

Engine Oil Change on a KTM EXC-F 350
Engine Oil Change on a KTM EXC-F 350
Exc F 350 .. the regular maintenance service on a KTM EXC-F 350. First, drain the old engine oil by unscrewing the drain bolt located under the engine; allow it.. …
How to Change the Engine Oil on a KTM EXC-F 350?
How to Change the Engine Oil on a KTM EXC-F 350?
Exc F 350 .. To change the engine oil on the KTM EXC-F 350, loosen the drain plug located at the bottom centre of the bike. Once this bolt is loosened, you.. …
How to Change the Engine Oil of a KTM EXC-F 350?
How to Change the Engine Oil of a KTM EXC-F 350?
Exc F 350 .. To change the engine oil of a KTM EXC-F 350, loosen the drain plug located at the bottom centre of the bike's oil tank. Once the plug is removed,.. …

How to Replace the Rev Sensor on a Benelli TNT 600

This guide provides instructions on how to remove and replace the engine rev sensor on a Benelli TNT 600 motorcycle by following these simple steps. First, place your motorcycle on a stand and disconnect the electrical connector of the rev sensor located on the left side engine cover; then use a socket spanner with an extension to unscrew and remove the bolt, as shown in the video. At this point, remove and replace the rev sensor, installing the original part to ensure proper functioning, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos