Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of a KTM EXC-F 350?

Model: Ktm Exc F 350
Part: Engine oil

Video tutorial

To change the engine oil of a KTM EXC-F 350, loosen the drain plug located at the bottom centre of the bike's oil tank. Once the plug is removed, allow all the oil to drain into a container placed underneath until it is empty.

Then, remove the oil filter from its location on the right side of the bike and replace it with a new one. After replacing the filter, using a funnel, pour the new oil into the hole at the top of the casing located on the right side of the bike.


Updated on 20 May 2026 by ScegliAuto


Related tutorials

Engine Oil Change on a KTM EXC-F 350
Engine Oil Change on a KTM EXC-F 350
Exc F 350 .. the regular maintenance service on a KTM EXC-F 350. First, drain the old engine oil by unscrewing the drain bolt located under the engine; allow it.. …
How to Replace Engine Oil and Oil Filter on the KTM EXC 350
How to Replace Engine Oil and Oil Filter on the KTM EXC 350
Exc F 350 In today's tutorial, you will learn how to replace the engine oil and oil filter while performing the regular maintenance service on the KTM EXC 350 …
How to Change the Engine Oil on the KTM EXC-F 350
How to Change the Engine Oil on the KTM EXC-F 350
Exc F 350 .. To change the engine oil on the KTM EXC-F 350, loosen the drain plug located at the central lower part of the bike: once this plug is loosened,.. …

How to Replace the Rev Sensor on a Benelli TNT 600

This guide provides instructions on how to remove and replace the engine rev sensor on a Benelli TNT 600 motorcycle by following these simple steps. First, place your motorcycle on a stand and disconnect the electrical connector of the rev sensor located on the left side engine cover; then use a socket spanner with an extension to unscrew and remove the bolt, as shown in the video. At this point, remove and replace the rev sensor, installing the original part to ensure proper functioning, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos