Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on a KTM EXC-F 350

Model: Ktm Exc F 350
Part: Engine oil

Video tutorial

In this video tutorial, you will learn how to change the engine oil while performing the regular maintenance service on a KTM EXC-F 350. First, drain the old engine oil by unscrewing the drain bolt located under the engine; allow it to drain for at least ten minutes into a container, as shown in the video.

At this point, screw the bolt back in and remove the oil filter to clean it of any impurities; then pour the new engine oil into the designated hole and fill it to the maximum mark!


Updated on 4 April 2026 by ScegliAuto


Related tutorials

Changing the Engine Oil and Oil Filter of the KTM EXC-F 350
Changing the Engine Oil and Oil Filter of the KTM EXC-F 350
Exc F 350 .. the engine oil and oil filter of the KTM EXC-F 350 enduro bike. First, unscrew the oil drain bolt located under the engine using a socket spanner,.. …
Replacing the Clutch Discs on the KTM EXC 350
Exc F 350 In this video tutorial, you will learn the procedure for removing and replacing the clutch discs on the KTM EXC 350 enduro bike. First, drain the eng…
Replacing the Brake and Clutch Levers on the KTM EXC-F 350
Replacing the Brake and Clutch Levers on the KTM EXC-F 350
Exc F 350 .. the brake and clutch levers on the KTM EXC-F 350 enduro bike. First, remove the front brake lever; to do this, unscrew the fixing bolt of the lever.. …

How to Replace the Rev Sensor on a Benelli TNT 600

This guide provides instructions on how to remove and replace the engine rev sensor on a Benelli TNT 600 motorcycle by following these simple steps. First, place your motorcycle on a stand and disconnect the electrical connector of the rev sensor located on the left side engine cover; then use a socket spanner with an extension to unscrew and remove the bolt, as shown in the video. At this point, remove and replace the rev sensor, installing the original part to ensure proper functioning, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos