Do it yourself
Frequently asked questions about cars and motorcycles

Replacing the Brake and Clutch Levers on the KTM EXC-F 350

Model: Ktm Exc F 350
Part:

Video tutorial

In this guide, discover the necessary instructions for removing and replacing the brake and clutch levers on the KTM EXC-F 350 enduro bike. First, remove the front brake lever; to do this, unscrew the fixing bolt of the lever to remove it and replace it with the new one, as shown in the video.

Next, replace the clutch lever using the same procedure; disconnect the clutch cable in this case. Finally, install your levers and adjust them to your preference!


Updated on 22 May 2026 by ScegliAuto


Related tutorials

Exc F 350 This guide provides the main instructions for removing and replacing the clutch lever (also applicable to the front brake lever) on the KTM EXC 350 e…
Exc F 350 In this video tutorial, you will learn the procedure for removing and replacing the clutch discs on the KTM EXC 350 enduro bike. First, drain the eng…
Exc F 350 .. To replace the clutch of the KTM EXC-F 350, you need to loosen the screws that secure the clutch cover, located on the right side of the vehicle... …

How to Replace the Key Fob Battery for the Piaggio Vespa GTS 125?

Let's discover the steps to disassemble and replace the battery of the key fob for the Piaggio Vespa GTS 125. First, take your remote and start by removing the plastic cap at the end. Then, leverage the gap created to open the remote into two parts, accessing the electronic board and the battery, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type and the same specification; insert it the right way round and check the operation of the electronic key!

Watch the video!


by ScegliAuto

More videos