Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Exc F 350
Part: Clutch

In this video tutorial, you will learn the procedure for removing and replacing the clutch discs on the KTM EXC 350 enduro bike. First, drain the engine oil by unscrewing the drain bolt located under the engine. Next, remove the screws from the clutch cover to gain access, as shown in the video. At this point, unscrew the screws of the upper metal disc; then remove the other cork discs and replace the clutch with a new one. Follow the reverse procedure for reassembly!

Updated on 7 May 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Replace the Clutch on a KTM EXC-F 350?
How to Replace the Clutch on a KTM EXC-F 350?
Exc F 350 To replace the clutch on the KTM EXC-F 350, loosen the bolts securing the cover on the side of the bike. Once the cover is open, unscrew the six scre…
How do you replace the clutch of the KTM EXC-F 350?
How do you replace the clutch of the KTM EXC-F 350?
Exc F 350 To replace the clutch of the KTM EXC-F 350, you need to loosen the screws that secure the clutch cover, located on the right side of the vehicle. Onc…
Replacing the Brake and Clutch Levers on the KTM EXC-F 350
Replacing the Brake and Clutch Levers on the KTM EXC-F 350
Exc F 350 In this guide, discover the necessary instructions for removing and replacing the brake and clutch levers on the KTM EXC-F 350 enduro bike. First, re…

Servicing a Honda SH300 Scooter

How to service the SH 300 scooter. This operation should be done with the engine cold. Remove the cover and take out the air filter, cleaning the compartment where the new one will be placed. Refit the three screws you removed earlier and reassemble the cover. Remove the oil cap, take a 12 mm spanner and unscrew the oil plug from underneath. Allow the oil to drain into a suitable container, which you will then dispose of at an authorised centre. Remove the filter, clean the cavity where the new one will be fitted, and tighten it with the spanner. Refit the oil cap screw. Always change the washer on the cap. Now, refill with oil. You will need a synthetic oil like Motul 5100 10W40, which costs £12.40 per litre on Amazon. If you are doing a complete change, you will need two cans, as you will require 1.6 litres including the filter. After adding the oil, let it rest for a few minutes, then run the engine for a few minutes and check the level. If necessary, top it up: it should be halfway between min and max.

Watch the video!


by ScegliAuto

More videos