Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Clutch on a KTM EXC-F 350?

Model: Ktm Exc F 350
Part: Clutch

Video tutorial

To replace the clutch on the KTM EXC-F 350, loosen the bolts securing the cover on the side of the bike. Once the cover is open, unscrew the six screws securing the clutch plates.

After the screws have been removed, you can replace the clutch plates by pulling them out of their housing. The new plates should then be secured with the screws that were previously removed.

After installation, you can close the cover again by securing it with the screws that were removed earlier.


Updated on 26 April 2026 by ScegliAuto


Related tutorials

Exc F 350 This guide provides the main instructions for removing and replacing the clutch lever (also applicable to the front brake lever) on the KTM EXC 350 e…
Exc F 350 In this video tutorial, you will learn the procedure for removing and replacing the clutch discs on the KTM EXC 350 enduro bike. First, drain the eng…
Exc F 350 .. the brake and clutch levers on the KTM EXC-F 350 enduro bike. First, remove the front brake lever; to do this, unscrew the fixing bolt of the lever.. …

How to Replace the Key Fob Battery for the Piaggio Vespa GTS 125?

Let's discover the steps to disassemble and replace the battery of the key fob for the Piaggio Vespa GTS 125. First, take your remote and start by removing the plastic cap at the end. Then, leverage the gap created to open the remote into two parts, accessing the electronic board and the battery, as shown in the video. At this point, remove the old battery and replace it with a new one of the correct type and the same specification; insert it the right way round and check the operation of the electronic key!

Watch the video!


by ScegliAuto

More videos