Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to install the windshield on the Husqvarna Norden 901, you will first need to remove the front panel of the motorcycle fairing that is present: to remove it, you will need to unscrew the screws located at the bottom and on the sides of the motorcycle. Once all the screws have been removed, you can proceed to detach the panel: this will allow you to position the windshield in its housing. The windshield must be fixed with the appropriate screws and after installation, you can verify that the component does not cause any problems during driving.

Posted on 12 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust of the Husqvarna Norden 901?
How do you replace the exhaust of the Husqvarna Norden 901?
Norden 901 To replace the muffler of the Husqvarna Norden 901, you need to loosen the screws that secure the panel on the side of the vehicle, near the rear whe…
How do you replace the exhaust of the Husqvarna Norden 901?
How do you replace the exhaust of the Husqvarna Norden 901?
Norden 901 It will be possible to replace the exhaust installed on the Husqvarna Norden 901 by unscrewing the screws that fix the cover on the side of the corre…
How do you replace the exhaust pipe of the Husqvarna Norden 901?
How do you replace the exhaust pipe of the Husqvarna Norden 901?
Norden 901 The exhaust pipe installed on the Husqvarna Norden 901 can be replaced by loosening the screws that secure the cover on the side of the rear wheel fe…

How to Remove the Final Drive from a BMW R 1200 GS?

To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos