Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Ktm Exc F 350
Part:

This guide provides the main instructions for removing and replacing the clutch lever (also applicable to the front brake lever) on the KTM EXC 350 enduro bike. First, place your bike on a stand and begin unscrewing the pivot bolt of the clutch lever using a star key and a socket wrench with an extension. Then, disconnect the clutch lever cable as shown in the video. At this point, install the new original lever, and finally adjust the cable and clutch, following the video tutorial to the end!

Updated on 27 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Brake and Clutch Levers on the KTM EXC-F 350
Replacing the Brake and Clutch Levers on the KTM EXC-F 350
Exc F 350 In this guide, discover the necessary instructions for removing and replacing the brake and clutch levers on the KTM EXC-F 350 enduro bike. First, re…
How to Replace the Instrument Cluster Battery on the KTM EXC F-350
How to Replace the Instrument Cluster Battery on the KTM EXC F-350
Exc F 350 To replace the instrument cluster battery on the KTM EXC F-350, first detach the side clips that secure the front fairing. Once removed, you can acce…
Engine Oil Change on a KTM EXC-F 350
Engine Oil Change on a KTM EXC-F 350
Exc F 350 In this video tutorial, you will learn how to change the engine oil while performing the regular maintenance service on a KTM EXC-F 350. First, drain…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos