Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Gasgas Ec 125
Part: Engine

The operation of dismantling the engine of the GasGas EC 125 is carried out by accessing the central part of the bike immediately under the seat. To remove it from its housing, unscrew the screws and disconnect the appropriate connectors. Once the engine has been extracted, you can separate the two half-cases that comprise it by unscrewing the fixing bolts. This will allow access to the clutch, which can be completely removed by sliding out all the discs; it will also be possible to detach the piston from the corresponding connecting rod after removing the cylinder.

Updated on 7 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Dismantle the Engine of the GasGas EC 125
How to Dismantle the Engine of the GasGas EC 125
Ec 125 To dismantle the engine, access the central part of the bike directly under the seat. Remove it from its housing by unscrewing the screws and disconn…
How to Remove the Engine from the GasGas EC 125
How to Remove the Engine from the GasGas EC 125
Ec 125 To remove the engine from the GasGas EC 125, extract the engine block from its housing after loosening the mounting bolts of the respective supports.…
How to Replace the Cylinder on a GasGas EC 125
How to Replace the Cylinder on a GasGas EC 125
Ec 125 To replace the cylinder on a GasGas EC 125, first loosen the screws securing the seat to its housing, which will also detach the side panels located …

How to Replace the Engine Oil in the KTM Duke 390?

As you can see in this tutorial, replacing the engine oil in the KTM Duke 390 is a very simple and quick task. Before proceeding, wait until the engine is completely cold to work safely. Start by placing a container underneath the bike, then locate the drain plug on the lower left side and unscrew it with a socket wrench. Once all the oil contained in the engine has drained out, open the filter housing cap, replace the filter, and reassemble everything. Finally, insert new oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos