Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Z900
Part: Engine oil

Regular maintenance is essential for the proper functioning of the engine; here’s how to perform it on the Kawasaki Z900. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then unscrew the oil filter cartridge, replacing it with a new one (screw it in by hand and tighten gently), as shown in the video. Now unscrew the filler cap and top up with the appropriate new oil.

Updated on 13 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Engine Oil and Oil Filter on a Kawasaki Z900
Changing the Engine Oil and Oil Filter on a Kawasaki Z900
Z900 It takes just a few steps to perform routine maintenance by changing the engine oil and oil filter on a Kawasaki Z900. First, position the stand on y…
How to Change the Engine Oil and Oil Filter on a Kawasaki Z900
How to Change the Engine Oil and Oil Filter on a Kawasaki Z900
Z900 In this guide, you will learn how to perform routine maintenance by changing the engine oil and oil filter on a Kawasaki Z900. First, drain the old e…
How to Change the Engine Oil in a Kawasaki Z900?
How to Change the Engine Oil in a Kawasaki Z900?
Z900 In this tutorial, you will see how to change the engine oil in a Kawasaki Z900, a very simple and quick operation to perform every 12 months. First, …

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos