Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Kawasaki Z900

Model: Kawasaki Z900
Part: Engine oil

Video tutorial

In this guide, you will learn how to perform routine maintenance by changing the engine oil and oil filter on a Kawasaki Z900. First, drain the old engine oil; use a 17 mm socket spanner to unscrew the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes.

Next, remove the old oil filter using the appropriate tool; then insert the new one, tightening it by hand.

Finally, pour and fill the engine casing with the new oil!


Updated on 14 April 2026 by ScegliAuto


Related tutorials

Changing the Engine Oil and Oil Filter on a Kawasaki Z900
Changing the Engine Oil and Oil Filter on a Kawasaki Z900
Z900 It takes just a few steps to perform routine maintenance by changing the engine oil and oil filter on a Kawasaki Z900. First, position the stand on y…
How to reset the oil service light on the Kawasaki Z900?
How to reset the oil service light on the Kawasaki Z900?
Z900 In this tutorial, you will see how to reset the oil service light on the Kawasaki Z900, an extremely simple and quick operation to perform only after…
How to Change the Engine Oil in a Kawasaki Z900
How to Change the Engine Oil in a Kawasaki Z900
Z900 As shown in this tutorial, changing the engine oil in a Kawasaki Z900 is a straightforward and quick task. Before proceeding, ensure the engine is co…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos