Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on a Derbi Senda 125, loosen the bolts that secure the exhaust at the lower central part of the bike and at the rear. Once all these securing bolts are loosened, you can disconnect the exhaust from the remaining parts of the exhaust system. At this point, position the new exhaust, connecting it to the exhaust pipe using the appropriate retaining ring. Finally, secure the exhaust in place by tightening the specific bolts that connect it to the supports.

Updated on 9 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Senda 125 To replace the exhaust on a Derbi Senda 125, loosen the bolts securing the exhaust at the lower central part of the bike and at the rear side. Once a…
Senda 125 It will be possible to replace the exhaust installed on the Derbi Senda 125 by loosening the screws that fix the exhaust terminal in the central lowe…
Senda 125 You can replace the exhaust fitted on the Derbi Senda 125 by loosening the screws that secure the cover panel located on the right side of the bike, …

How to Replace the Rear View Mirror on a Honda Forza

To replace the rear view mirror on a Honda Forza, use a screwdriver to lever under the front cover of the fairing to detach it. Underneath, you will find the bolts securing the windscreen and its support: by removing these, you can access the screws holding the rear view mirror. Unscrew these screws and disconnect the connectors attached to the mirrors, allowing you to completely remove them and install the new ones: these must be connected to the connectors, positioned in their place, and secured with the appropriate bolts.

Watch the video!


by ScegliAuto

More videos