|
Do it yourself
| |||
| ||||
|
Model: Derbi Senda 125
To replace the exhaust on a Derbi Senda 125, loosen the bolts securing the exhaust at the lower central part of the bike and at the rear side. Once all these fixing bolts are loosened, disconnect the exhaust from the remaining parts of the exhaust system. At this point, position the new exhaust, connecting it to the exhaust pipe using the appropriate fixing ring. Finally, secure the exhaust in place by reinserting the support bolts at the mudguard.
Updated on 13 September 2026 by ScegliAuto
Video tutorial
Related tutorials
Senda 125
To replace the exhaust on a Derbi Senda 125, loosen the bolts that secure the exhaust at the lower central part of the bike and at the rear. Once all…
Senda 125
It will be possible to replace the exhaust installed on the Derbi Senda 125 by loosening the screws that fix the exhaust terminal in the central lowe…
Senda 125
You can replace the exhaust fitted on the Derbi Senda 125 by loosening the screws that secure the cover panel located on the right side of the bike, …
|
How to Remove the Final Drive from a BMW R 1200 GS?
To remove the final drive from a BMW R 1200 GS, loosen the bolts securing the exhaust so it can be removed along with the rear wheel. The rear wheel will also be removed by unscrewing the five bolts that secure it to the swingarm. Next, detach the brake caliper by unscrewing the mounting bolts and remove the rear part of the swingarm. Inside, you will find the final drive, which should be extracted and replaced with a new spare part; after replacement, reassemble all previously removed components. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |