Do it yourself
Frequently asked questions about cars and motorcycles
To replace the exhaust on a Derbi Senda 125, completely unscrew the bolts securing it to its mounting: these are located at the top of the exhaust, near the rear mudguard. Once these bolts are loosened, proceed by removing the securing ring that connects the exhaust tip to the collector, fully removing the exhaust. At this point, insert the new exhaust, securing it in place with the appropriate bolts at the rear and connecting it to the collector with the designated ring.

Updated on 5 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Senda 125 To replace the exhaust on a Derbi Senda 125, loosen the bolts that secure the exhaust at the lower central part of the bike and at the rear. Once all…
Senda 125 It will be possible to replace the exhaust installed on the Derbi Senda 125 by loosening the screws that fix the exhaust terminal in the central lowe…
Senda 125 You can replace the exhaust fitted on the Derbi Senda 125 by loosening the screws that secure the cover panel located on the right side of the bike, …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos